Operating Conditions
Cures at room temperature and reaches a certain strength in about 8 hours.
01Repair of various metal castings and restoration of blowholes, sand holes, cracks, wear and corrosion in castings
Repair adhesive is a two-component, paste-like inorganic adhesive used to repair various metal castings and to restore blowholes, sand holes, cracks, wear and corrosion in castings. After repair, the colour remains consistent, and the repaired area can be drilled, threaded, cut, sanded and tapped in various machining operations.
Mainly used for bonding and repairing cracks and damage in various engine blocks and housings; it can also fill casting defects such as sand holes, blowholes and pitting
A wear-resistant composite with metal carbides and superhard ceramics as aggregate, used for repair and preventive protection of worn parts such as pumps, impellers and material conveying equipment subject to erosion by abrasives smaller than 3 mm, including mortar pumps, water pumps, fans and turbine volutes
Low viscosity, easy to trowel, high bond strength to the substrate, smooth and even surface after curing, effectively reducing surface wear, erosion and cavitation. Used for repairing and preparing large-area preventive protective coatings for corroded valves, impellers, fan blades, refrigerators, pipelines, heat exchangers, reactors, storage tanks and other equipment
A wear-resistant composite with hard spherical ceramic particles and quartz as aggregate; the cured product has excellent wear resistance and is used for repairing large-area equipment wear under fine-particle impact conditions or preparing preventive protective coatings for flues, coal mills, desulfurization pipelines, etc.
Low viscosity, brushable, excellent chemical resistance; used for repairing and preparing preventive protective coatings for corroded pumps, valves, pipelines, heat exchangers and reactors
Excellent acid and alkali resistance; used for repairing locally corroded pumps, valves, pipelines, heat exchangers, reactors, etc.
A wear-resistant composite with metal carbides and superhard ceramics as aggregate; used for repair and preventive protection of equipment subject to high-load coarse-particle erosion and cavitation with abrasive particle sizes up to 25 mm, such as pipelines, water pump casings and impellers
A wear-resistant composite using high-performance titanium alloy as reinforcement and high-hardness metal carbide as aggregate; its relative wear resistance is 2-3 times that of medium carbon steel, with high compressive strength and good impact toughness
Features no sagging on vertical surfaces up to 15 mm thick, good temperature resistance, fast curing and excellent low-temperature curing performance. Used for preparing wear-resistant coatings for erosion wear of dust-laden gas conveying pipelines and equipment, such as conveying pipelines and chimney ducts in mines or power plants
Try contacting us
Cures at room temperature and reaches a certain strength in about 8 hours.
01Suitable for general environments: waterproof, acid and alkali resistant, aging resistant and shock resistant.
02250 g/kit or 500 g/kit
03Store in a cool, dry place at 5-25°C (humidity no more than 70% RH). Shelf life: 12 months.
04