- Home
- About Changde
- Success Cases
Case Details
Impeller Repair
Repair compounds are a commonly used non-welding repair method for impellers, especially suitable for light to moderate surface damage such as wear, scratches, small-area corrosion and minor cracks. Impeller repair with repair compounds offers the advantages of simple operation, relatively low cost and little heat effect on the substrate
Details
Repair compounds are a commonly used non-welding repair method for impellers, especially suitable for light to moderate surface damage such as wear, scratches, small-area corrosion and minor cracks. Impeller repair with repair compounds offers the advantages of simple operation, relatively low cost and little heat effect on the substrate.
Proportional mixing: according to the product instructions, accurately weigh and mix the base and curing agent, ensuring thorough and uniform mixing to avoid uneven curing or reduced performance.
Filling and shaping: fill the mixed repair compound into the damaged area of the impeller, smooth it with a scraper, brush or special tool, ensure the compound fully covers the damaged area, and restore the original contour and thickness of the impeller as much as possible. For larger or complex damage, layered application and curing may be required.
Curing: allow the repair compound to cure fully. Some repair compounds may need heating to accelerate curing.
Sanding and polishing: after the repair compound has fully cured, sand the repaired area with sandpaper, a grinding wheel or a polisher so that it transitions smoothly to the original impeller surface; polish if necessary to restore surface finish and reduce airflow disturbance during operation.

